Keep the coating information together

Keep the proposal and handover information with a record of the products, colours and finishes used. Label the record by surface or area, especially where walls, timber and metal have different systems. A colour name alone will not tell you how the surface should be maintained.

Ask when the coating can first be cleaned and which care instructions apply. If you have bought a previously painted home, tell the painter what is unknown rather than treating an old tin in the shed as a complete specification.

Include the sheltered parts of the house

From a safe ground-level position, look at exposed walls as well as areas beneath eaves and verandas. Resene's exterior maintenance guidance highlights salt deposits in sheltered areas that rain does not wash. Shelter is a reason to include an area in your checks, rather than assume it needs no attention.

Make a note of the location and what has changed. A dated photograph from the same position can help explain a concern when you seek advice, without needing to guess the cause yourself.

Match cleaning to the surface and finish

Before cleaning, check the coating manufacturer's directions for the actual product and substrate. A method suited to one surface should not automatically be used on adjoining timber, metal or a different coating. Follow the specified restrictions and protection requirements.

If the coating is unknown, damaged or difficult to reach, ask for advice first. Do not assume a pressure washer, abrasive pad or stronger chemical will be suitable. This guide does not prescribe a universal washing interval or cleaning recipe for coastal homes.

Separate observations from a diagnosis

Note peeling, cracks, chalky areas or rust, and mention recurring damp patches or nearby water overflow. Record whether the area looks different after rain and whether the same concern has returned after earlier work. That history is useful for assessment.

A photograph can show a symptom without establishing why it has appeared. Ask whether the next step is cleaning, preparation and recoating, or investigation beyond the painting scope. A fresh coat cannot be assumed to resolve an ongoing building or moisture problem.

Keep decks and roofs in their own care plans

Timber decks have their own coating and condition considerations. Use the deck-care guide for questions about boards, drainage and refinishing rather than borrowing instructions from a painted wall. Raise damaged or unstable timber separately from a request for a new finish.

For concerns above safe ground-level reach, arrange suitable help instead of climbing to inspect or clean. Pether's Painting coordinates roof restoration through a licensed roofing partner; roofing assessment and any resulting work are a separate scope.

Make the next conversation specific

Use a simple care note when you contact the team. It makes it easier to explain the area you are concerned about and identify the information still needed.

  • Location and surface, such as the painted wall beneath the rear veranda.
  • Known product, finish and date of previous work, if recorded.
  • What changed, when you noticed it and any recurring water exposure.
  • Previous cleaning or touch-ups, with photographs taken from a safe position.

Further reading